top of page

Learn more about our advanced mold removal through dry-fogging

Mold Removal and Dry Fogging

Schedule your mold removal service today

Mold Remediation in Portland

Rescom Restoration provides mold removal for homes and businesses in the Portland Metropolitan area. We use the patented InstaPURE dry fog technology that allows us to wipe out toxic mold from virtually any building. Our revolutionary mold remediation method breaks down microbes on a molecular level, eliminates the problem without removing walls or ceilings. And because our fog is dry, nothing in your home or office is at risk for water damage.

Our mold remediation process delivers precise mold removal for any part of your home or office:

100% non-toxic procedure

Single-day job for most applications

√  Environmentally Safe

Demolition-free in most cases

Always effective

EPA registered

√  Affordable

Guaranteed to kill mold

Advanced Mold Removal Portland

Rescom Restoration provides mold removal from homes and businesses in the Portland Metropolitan region. We use a patented dry fog technology that allows us to wipe out toxic mold from virtually any building. Our revolutionary mold remediation method means we can break down microbes on a molecular level, and get rid of the problem without removing walls or ceilings. And because our fog is dry nothing in your home or office is at risk for water damage. We also offer discounted wholesale rates to local subcontractors, give us a call for more information.


In and around cabinets

√  Under the kitchen sink

Window sills and frames

√ Ductwork/HVAC



√  Drywalls


√  Closets

Exposure to Mold

Mold is an unwanted fungus that can be found inside and outside your home. Whether it be on your walls or windows, your ventilation systems or elsewhere, the CDC recommends all mold should be removed. Typically, mold develops when there is moisture or damp environments such as leaks in the wall or near the shower. 


Exposure to mold can cause a variety of health problems such as coughing, irritation of the throat, eye and nasal stuffiness. Although some may experience limited symptoms, those who are allergic or are more prone to diseases should avoid mold completely. Mold can be extremely dangerous in the home and can precipitate serious health problems.

Where is it?

As mentioned before, mold can be found where there is moisture. Rescom will perform a thorough inspection to see where there is mold growth and areas that are susceptible to it. Typically, you may want to check your ventilation systems, bathrooms, cracked or leaking ceilings.


Mold Removal: Dry Fogging

You may be wondering, how do I completely remove mold from my household or property? Here at Rescom, we choose a demolition-free mold removal process through dry fogging. Dry fogging is an advanced method of cleaning mold throughout the home without causing any damage. 

Dry Fog

Smaller droplets rebound from surfaces creating a vapor. The vapor, as well as the fumes, create an inescapable environment for mold and bacteria.

Wet Fog or Ozone

The larger droplets burst and create wet surfaces, like rain. The larger particle size also creates gaps in molecular coverage and leaves a residue.

Dry-fogging allows us to sterilize every part of a room and everything in it. Remove mold from every corner of your building by letting our dry fog disinfects carpets, furniture, upholstery, cabinets, toys, electronics and more.

Our dry fog mold removal eliminates mold spores from the air and penetrates walls, floors, and ceilings to sterilize every surface of your home. For mold that’s gotten behind or beneath the surface area, dry fogging is provides a quick solution that kills active mold spores.

Traditionally, mold that has reached the inside of walls requires expensive demolition of the entire wall (or walls) to remove. With our proven method of dry fog mold removal, you get 100% sterilized mold at a fraction of the cost compared to other mold removal procedures.

In many cases, there will be absolutely zero need for any demolition within the building. Our process leaves you with mold-free air, removes mold spores on contact and puts an end to the spread of mold in your home or office.

Why Choose Demolition-Free Mold Removal?


Using patented dry fog technology, Rescom Restoration can fill up the entire volume of space within a building with an EPA approved sterilant that removes bacteria, virus, and mold from surfaces and denatures spores that are airborne, in furniture, fabrics, in the air ducts, and behind walls. The process is so effective, we guarantee our results. The air in your home will be safer and more healthy than the air outside by the time we are done.

We're Affordable

Because of the new technology developed by Pure Maintenance, we can do jobs faster and without the unnecessary costs of replacing walls and carpet. This savings is transferred to you the customer. Our dry fog saves the labor intensive and very expensive process in hand cleaning all loose items and wiping down all hard surfaces with a liquid anti-microbial inside the home. Rescom Restoration provides free inspections and estimates. Our prices are usually less than half of that of our competitors.


Old remediation methods can take weeks to get mold levels back to satisfactory levels in a single room, not to mention the rest of the home. Once that process is over, you begin the painstaking labor of rebuilding everything that was torn out. With dry fog technology, once the area is dry the entire problem can be taken care of in 4 hours or less.

Less Invasive

Instead of quarantining off a section of your house and having contractors walking in and out for weeks, Rescom Restoration will simply back their truck up bring a few small nozzles into the home or office and 4 hours later your home will be free of any harmful mold or pathogens.

Mold Types: Allergenic, Pathogenic, and Toxigenic

Allergenic: Molds that cause and produce allergies and allergic reactions such as asthma attacks.

Toxigenic: Molds that produce toxic substances that can lead to dangerous or even deadly health conditions. This is sometimes referred to as “toxic mold.”

Pathogenic: Molds that cause health problems in those suffering from an acute illness.

What makes us different

Our dry fogging technology is what makes us so unique apart from the competition. Getting rid of the mold in your home shouldn't take destroying it with hammers and axes. Dry fog will allow each and every mold cell to be completely destroyed. With our dry fogging technology, our micron particles are able to bounce around the walls and rooms of your home for several minutes before dissipating. Dry fogging does not allow any part of your home to get wet or damaged, aside from killing mold!


The first step that we use for dry fogging is called InstaPURE. InstaPURE finds mold spores within your home and completely destroys them. Additionally, it is a disinfectant that will now allow the air quality in your home to be completely clean and healthy. InstaPURE is used in hospitals, gyms, and daycares!


The second step is the application of EverPURE. EverPURE prevents new bacteria, mold and fungus to further enter your home. EverPURE provides an EPA verified 90 days of protection once applied. EverPURE remains on every surface of your home protecting you from further bacteria, mold and fungus from getting a foothold in your home or business. 

Mold Testing and Allergies 

Here at Rescom Restoration, we do a thorough investigation and inspection that would indicate any old or moisture trap

Mold Removal and Dry Fogging

Rescom Restoration provides mold removal from homes and businesses in the Portland Metropolitan region.

Water Damage

We can return any home to the state it was in before the damage occurred. 

Rescom Restoration is available for same-day and emergency services - we also offer repair services (if needed) to help evaluate and stop any moisture issues contributing to your mold problem. Our demolition-free dry fog system has two components; First, is a sterilant which dissolves the outer membrane of a mold spore on a molecular level. Second, is a microscopic layer of preventative molecules which attract mold spores when they re-enter the environment and kills them. This is a non-invasive, non-toxic, all-inclusive, cost-effective treatment that takes roughly 2 hours per 1,000 sq. ft of living spaceWe will make sure you are back in your home the same day.

** 1 Free Air Test with Service Call ($50 Value) **

(mention this promo during scheduling to redeem)

Contact Us

For any questions or general inquiries, please give us a call or fill out the form below and we will get in touch with you as soon as possible!


           (503) 657-4563

We service Washington, Clackamas and Multnomah County 

Screen Shot 2019-07-30 at 9.24.37 AM.png

Monday  - Friday: 7AM - 7PM

Saturday: 7AM - 7PM

Sunday: Closed

Emergency Services

available Sundays and after hours 

bottom of page